Forklift Training Programs Chandler

Forklift Training Programs Chandler - If you are looking for a job as a forklift operator, our regulatory-compliant forklift training programs offer excellent instruction in various types and styles of forklifts, classes on pre-shift check, fuel types and handling of fuels, and safe use of a lift truck. Practical, hands-on training helps those participating in obtaining essential operational skills. Program content covers existing regulations governing the operation of lift trucks. Our proven forklift programs are designed to offer training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

When the lift truck is in operation, do not lower or raise the forks. Loads must not extend higher than the backrest. This is due to the danger of the load sliding back towards the operator. Inspect for overhead obstacles and ensure there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it slightly back.

While the load is lifted the forklift will be less steady. Make sure that no pedestrians cross below the elevated fork. The operator must never leave the forklift when the load is lifted.

While handling pallets, forks should be high and level enough to go into the pallet and extend all the way beneath the load. The fork's width should provide even distribution of weight.

Set the brakes and chock the wheels before unloading and loading the truck. The floors should be strong enough to support the weight of both the forklift and its load. Fixed jacks could be installed in order to support a semi-trailer which is not attached to a tractor. The height of the entrance door should clear the forklift height by at least 5 cm. Edges of docks, rail cars and ramps must be marked and avoid them.

Do not stay inside a lift truck for a long time without proper ventilation. The interior of the truck must be well lighted and free of obstructions, trash and loose objects. Check for holes in the floor. The installation of nonslip material on the floor would help avoid slipping. Clear whichever obstacles from dockplates and docks and make sure surfaces are not wet or oily.

Never push or tow other vehicles using a forklift.

Click to Download the pdf