Forklift Training Course Chandler

Forklift Training Course Chandler - CSA and OSHA establish criteria for forklift safety training that meets existing regulations and standards. Anyone planning to operate a forklift is needed to successfully complete safety training prior to utilizing whichever type of forklift. The accredited Forklift Operator Training Program is intended to offer those training with the information and practical skills to become a forklift operator.

Mobile Equipment and Vehicle safety regulations which apply to forklift use include pre-shift checks, and rules for loading and lifting.

An inspection checklist must be done and submitted to the supervising authority prior to starting a shift. When a maintenance issue is uncovered, the use of the specific machine should be discontinued until the problem has been addressed. To indicate the machinery is out of service, the keys must be removed from the ignition and a warning tag placed in a visible place.

Safety regulations for loading will comprise checking the load rating capacity on the forklift to determine how much the equipment could handle. When starting the machine, the forks should be in the downward position. Keep in mind that there is a loss of about 100 pounds carrying capacity for every inch further away from the carriage which the load is carried.

So as to safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to one inch under the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other workers. Do not allow forks to drag on the ground.

Forklift loads should be loaded in such a way that they are secure and do not create a danger to other objects or people. Restraining loads is needed for materials which may shift during transport and destabilize the forklift.

Drums can be strapped together to avoid shifting and movement of the drums. Operators of forklifts must drive slowly when moving liquids, to decrease instability in the forklift.

Click to Download the pdf